Exceptional comfort...
Each of CINIER radiators is studied and conceived to diffuse exceptional heating comfort. Their technology is based on 3 principles:

·      the radiance of Olycale® stone

·      the thermal inertia of Olycale® stone

·      emission at low temperature thanks to the large surface of the radiator and electronic control.

The Olycale® stone: The Olycale® stone is a natural white colour rock (from the mountains of the Pyrennées in the south of France) that is smashed down and remodeled to provide for an exceptional diffusion of thermal energy.
Like cast iron, the  Olycale® stone emits soft and homogeneous heat at low temperature. Cinier radiators are perfectly silent.


Thermic mass effect (or inertia) :
The thermic mass of Olycale® stone provides a function of “accumulation” and “durable dissipation” of heating emission. It allows the diffusion of a cosy, constant, homogeneous heat to maintain the room at the right temperature with an exceptional comfort.

Low temperature heating:
The large surface area of CINIER radiators and the electronic regulation allow to heat at low temperature without propel air (Total silence of operation). The air of the room is not drytees, is healthier and pleasanter to breathe.


For hydraulic system with a boiler :

Heating core :
The heating body is made of heavy copper tubes (around 50 meters long), with an anti-corrosive and anti-dilation outer layer that guarantees silence and liability. Tested by 16 bars, the CINIER heating body guarantees an optimal performance and exceptional solidity.
The heating body is completely integrated in the Olycale stone thanks to an exclusive technological process. It also heats the mineral mass along the whole radiator’superficy who diffuse a natural lasting warm.

All the hydronic radiators by Cinier comply with EN442-2 regulations. Their quality and security are controlled and guaranteed.

 



Heating body :

The heating core is made with a heating cable utilizing a specific double insulation layer, which will not degrade over time. Our radiators are equiped with a double thermo-sensing security to prevent overheating.
The heating body is completely integrated in the Olycale stone thanks to an exclusive technological process. It also heats the mineral mass along the whole radiator’superficy who diffuse a natural lasting warm.

Connections :
An electric plug only.

Connexions :

The exit of alimentation water tubes should be build in the wall (to not see the inaesthetic tube). Connexion & dimensions scheme are available on demand.
Adapter: ½ Male bent inside Junction is made by hosepipes.
Tap, adjusting bends, joins and flexible are delivered with the radiator.

Output :

Output are calculated with the EN 442 European Norms (delta T 50). We can also give the output with delta T 60. Our Output is controlled by a international private laboratory.


Regulation :
Electric CINIER radiators are equipped with a proportional integral electronic RTS regulation. Its principle is simple : the RTS regulation constantly and proportionally adjusts yours radiators output (power) to the thermal needs.
The effect between the thermal mass of Olycale stone and the RTS regulator is highly efficient and provides noticeable energy savings. Easily accessible, the CINIER RTS regulator is also equipped with a programmable timer to automatically adjust itself to decrease 3°C during the night or while you are away (from one to ten Hours).

Greenor is  a top energy-efficient heating & cooling fan coil technology for low-temperature systems.

 

Cool Comfort:

A constant flow of eco-friendly cool air (refrigerant-free) for a draft-free comfort and cooling sensation

Warm Comfort :

The Greenor® fan coil saves energy while optimizing low-temperature heating systems (water at 50°C/ 122°F)

operating with heat pumps using renewable energy or condensing boilers.

Its unique concept offers comfort, high-end design and top-efficiency.

Environmentally friendly:

The Greenor® fan coil circulates chilled or low-temperature

water (55°C/122°F) through a coil for indoor cooling or heating

using renewable energy generators (biomass energy, heat

pumps, chillers or condensing boilers) for low-temperature

systems.

Unlike the traditional air conditioning systems, Greenor® is

refrigerant-free for a better respect of the environment.


Applications:

To replace hydronic radiators or fan coil systems

New installations

 

Residential & Commercial Applications:

Single family homes

Apartments

Restaurants, boutiques, hotels

Lobbies

Offices

… and where architecture wants to meet energy efficiency, comfort and modern

design aesthetic.

Greenor® is available as a reversible heating and cooling system or as a heating

system only.

Thermostats: control and simplicity

Options of :

- The infrared remote control: easy to use

Choose your operating speed

Choose your room temperature set point

Program your ideal room temperature

 

- Hard-wired control panel: easy heating and cooling control

Choose your operating speed

Control your room temperature set point

Control one or several Greenor® with one unique control panel

The IR remote control can also program all the Greenor® linked

to the same control panel


Energy performances and technical data controlled and tested by TUV laboratories, Munich, Germany :

Upload Technical data pdf

 
 CINIER Radiateurs contemporains 34200 SETEinfo@cinier.com
Copyright Cinier © 2011 création et referencement internet