|
|
Exceptional comfort...
Each CINIER radiators is studied and conceived to diffuse exceptional heating comfort. Their technology is based on 3 quality:
- the radiant of Olycale® stone
- the thermic mass effect (inertia) of Olycale® stone
- low temperature heating due to the electronic regulation and big surface of the panel
The Olycale® Stone: The Olycale® stone is a natural white colour rock (from the mountains of the pyrennée in the south of France) who is broken down and then specifically restructures to diffuse highly performant heating.
A real alternative to steel, cast iron or aluminium, the Olycale® stone, by her peculiar radiant quality, is the material predilection of the comfort. | |
Thermic mass effect (or inertia) :
The thermic mass of Olycale® stone provides a function of “accumulation” and “durable dissipation” of heating emission. It allows the diffusion of a cosy, constant, homogeneous heat to maintain the room at the right temperature with an exceptional comfort.
Low temperature heating:
The large surface area of CINIER radiators and the electronic regulation allow to heat at low temperature without propel air (Total silence of operation). The air of the room is not drytees, is healthier and pleasanter to breathe.
| |
For hydraulic system with a boiler :
Heating core :
The heating body is made of heavy copper tubes (around 50 meter of copper), covered by a special anticorosive and anti-expansion process to guarantee silence and an optimal liability. Tested by 16 bars, the CINIER heating body guarantees an optimal performance an exceptional solidity.
The heating body is completely integrated in the Olycale stone thanks to an exclusive technological process. It also heats the mineral mass along the whole radiator’superficy who diffuse a natural lasting warm.
| |
Heating body :
The heating core is made with a heating cable utilizing a specific double insulation layer, which will not degrade over time. Our radiators are equiped with a double thermo-sensing security to prevent overheating.
The heating body is completely integrated in the Olycale stone thanks to an exclusive technological process. It also heats the mineral mass along the whole radiator’superficy who diffuse a natural lasting warm.
Connections :
An electric plug only.
| |
Connexions :
The exit of alimentation water tubes should be build in the wall (to not see the inaesthetic tube). Connexion & dimensions scheme are available on demand.
Adapter: ½ Male bent inside Junction is made by hosepipes.
Tap, adjusting bends, joins and flexible are delivered with the radiator.
Output :
Output are calculated with the EN 442 European Norms (delta T 50). We can also give the output with delta T 60. Our Output is controlled by a international private laboratory.
| |
Regulation :
Electric CINIER radiators are equipped with a proportional integral electronic RTS regulation. Its principle is simple : the RTS regulation constantly and proportionally adjusts yours radiators output (power) to the thermal needs.
The effect between the thermal mass of Olycale stone and the RTS regulator is highly efficient and provides noticeable energy savings. Easily accessible, the CINIER RTS regulator is also equipped with a programmable timer to automatically adjust itself to decrease 3°C during the night or while you are away (from one to ten Hours).
| |
|
